Out Of Stock
Notify me when its in stock
Designed to reinforce the sound of instruments on stage, the Audio-Technica PRO 35 is a clip-on microphone that works equally well on sax, toms, brass instruments, and auxiliary percussion. The mic clamps onto your instrument with the supplied AT8418 UniMount clip, which allows for personalized positioning as well as shock protection for the mic's capsule.
As this is a cardioid microphone, it will have a fairly isolated sonic capture, minimizing bleed from other instruments on stage and reducing the possibility of feedback. The mic is affixed to a 6' cable and power module. A windscreen is also supplied.
| Microphones | |
|---|---|
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 50-15,000 Hz |
| Low Frequency Roll Off | 80 Hz, 18 dB/octave |
| Open Circuit Sensitivity | -45 dB (5.6 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | 145 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range | 115 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 64 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 2 mA typical |
| Switches | Flat, roll-off |
| Weight (Microphone) | 0.3 oz (8 g) |
| Weight (Power Module) | 2.9 oz (81 g) |
| Cable | 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
| Dimensions (Power Module) | 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter |
| Dimensions (Microphone) | 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter |
| Output Connector (Power Module) | Integral 3-pin XLRM-type |
| Accessories Included | AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch |
| Audio-Technica Case Style | M12 |
EN − TL
