Behringer Ultratone KXD15 Keyboard Amplifier

The Behringer Ultratone KXD15 PA System/Keyboard Amplifier is a powerful amplifier suitable for keyboards and drums. The lightweight speaker acts as a 4-channel PA system and features an impressive 15-inch Turbosound speaker and a 1-inch driver. The 600-watt amplifier is constructed with class-D amp technology to deliver an incredible sonic performance within lightweight housing.

An FX processor provides 100 presets including reverb, chorus, delay and many more whilst a revolutionary feedback detection system helps you concentrate on your sound. All 4 channels on the KXD15 include separate volume and FX send controls with an additional XLR mic input on channel 1 for direct dynamic microphone connection.

Absolute Signal Integrity

The Ultratone KXD15 delivers a truly high-resolution sound due to providing the woofer and tweeter with their very own amplifiers to maximise their capabilities. The separately powered drivers make sure users get the best possible sound as opposed to those speakers which implement simple passive crossovers. The signal integrity is complemented with class-D amplifier technology for an incredible sonic performance. The amplifier technology allows for huge sound performances within lightweight housing whilst also using less energy.

Total EQ Control

The KDX15 offers users with seven frequency bands, featuring an impressive 12 dB of available boost or cut per band for you to alter the EQ on keyboards and vocals. The combo amp covers the entire audio spectrum so users may create their perfect sound over specific frequencies.

Non-Existent Feedback

Behringer have developed a revolutionary feedback detection system to let users focus completely on their sound. The intuitive detection system lets you recognise and fix feedback frequencies as the associated fader illuminates to let you know to lower that control.

Flexible Connections

Each of the four separate stereo channels offer volume and FX send controls, allowing for excellent control over four independent signals. Channel 1 also features an additional XLR mic input to connect a dynamic microphone. The master section allows users to adjust the FX return and master volume. An AUX input lets you play recorded music through the combo amplifier whilst a separate headphone output lets you practice in peace.

Features

• True bi-amping amplifier design
• Dedicated LF & HF drivers
• Revolutionary class-D amplifier technology
• World-famous, British engineered 15'' TURBOSOUND speaker & 1'' driver
• Ultra-high quality KLARK TEKNIK FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifters & various multi-effects
• Revolutionary FBQ feedback detection system
• Full 4-channel stereo operation with separate volume & FX send per channel
• Additional XLR mic input on channel 1
• Dedicated 7-band graphic EQ
• Balanced stereo XLR DI with ground lift switch
• Main section with FX return level, master volume, phones level & shape switch
• Subwoofer output for ultimate low-end power
• AUX input allows users to play along to music
• Separate headphone output

Specifications

• Maximum Output PoweR: 600W
• Configuration: Bi-Amping
• Type: Class-D (Woofer), Class-AB (Tweeter)
• Overload Protection: Dual-Controlled Limiter
• Crossover Type: Active
• Crossover Frequency: 2.8kHz
• Audio Inputs/Outputs
  • Channel 1: 2 x 1/4'' TS, 40kΩ Unbalanced. 1 x XLR, 750Ω Balanced
  • Channels 2-4: 2 x 1/4'' TS, Per Channel. 35kΩ Unbalanced
  • AUX In: 2 x RCA. 20kΩ, Unbalanced
  • Line Out: 2 x XLR, 120Ω Balanced. 2 x 1/4'' TRS, 120Ω Balanced
  • Stereo Link: 2 x 1/4'' TS. 120Ω Balanced
  • Sub Out: 1 x 1/4'' TS. 120Ω Unbalanced
  • Phones: 1/4'' TRS Connector
• Equaliser: Graphic EQ With FBQ Feedback Detection
• Frequency Range: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz
• Control Range: ±12 dB
• Digital Effects Processor: KLARK TEKNIK
• Converters: 24-Bit Delta-Sigma
• Sampling Rate: 40kHz
• Display: 2-Digit, 7-Segment
• Loudspeakers: 15'' Woofer, 1'' Compression Driver
• Frequency Range: 38Hz - 20kHz
• Enclosure: Reinforced Wood Construction
• Grille: Perforated Steel
• Power Supply
  • USA/Canada: 120V, 60Hz
  • UK/Australia/Europe: 220-240V, 50/60Hz
  • Korea/China: 220-240V, 50/60Hz
  • Japan: 100V, 50/60Hz
• Power Consumption: 110w
• Mains Connection: Standard IEC Receptacle
• Weight: 22.4 kg
• Dimensions
  • Height: 483 mm
  • Width: 569 mm
  • Depth: 372 mm