The AT4047MP Multi-Pattern Condenser Microphone from Audio-Technica delivers vintage sound in a multi-pattern design with selectable omnidirectional, cardioid, and figure-eight polar patterns. The microphone's transformer-coupled output and specially tuned element provide sonic characteristics similar to early F.E.T. studio microphone designs. With a wide dynamic range, low self-noise, and high SPL capability, the microphone is suitable for vocals, strings, acoustic guitar, instrument ensembles, small vocal groups, and voiceovers.
Three switchable polar patterns: cardioid, omnidirectional, and figure-of-eight
Engineered to meet the critical acoustic requirements of professional recording, broadcast, and sound reinforcement
Transformer-coupled output and specially tuned element provide sonic characteristics similar to early F.E.T. studio microphone designs
Low self-noise, wide dynamic range, and high SPL capability
Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
Vintage silver-matte finish on microphone and shock mount
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
Custom shock mount provides superior isolation
Integral 80 Hz high-pass filter switch and 10 dB pad switch
Certified by the METAlliance (Music Engineering and Technology Alliance)
Audio-Technica AT4047MP Multi-pattern Condenser Microphone Features:
- Three switchable polar patterns: cardioid, omnidirectional, figure-8
- Engineered to meet the critical acoustic requirements of professional recording, broadcast and sound reinforcement
- Transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs
- Exceptionally low self-noise, wide dynamic range and high SPL capability
- Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
- Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
- Vintage silver-matte finish on microphone and shock mount
- Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
- Custom shock mount provides superior isolation
- Integral 80Hz highpass filter switch and 10dB pad switch
- Element:Externally polarized (DC bias) condenser
- Polar patterns:Cardioid, omnidirectional, figure-8
- Frequency response: 20Hz-18kHz
- Low-frequency roll-off: 80Hz, 12dB/octave
- Open circuit sensitivity: -42dB (7.9 mV), re 1V at 1 Pa
- Impedance: 100 ohms
- Max input sound level: 155dB SPL, 1kHz at 1% T.H.D.; 165dB SPL, with 10dB pad (nominal)
- Noise:14dB
- Dynamic range (typical):141dB, 1kHz at Max SPL
- Signal-to-noise ratio:80dB, 1kHz at 1 Pa
- Switches:Polar selection; Flat, roll-off; 10dB pad (nominal)
- Weight: 18.5 oz.
- Dimensions: 7.40" length; 2.10" maximum body diameter
- Output connectors:Integral 3-pin XLRM-type
- Included accessories:AT8449/SV shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case
- Requires +48V phantom power
Tech Specs
- Condenser
- Cardioid, Omni, Figure-8
- 0.84" (21.4mm)
- 20Hz-18kHz
- 155dB (165dB w/10dB Pad)
- 100 ohms
- 80dB
- 14dB
- 80Hz
- -10dB
- XLR
- Matte Silver
- 1.16 lbs.
- Shock Mount, Dust Cover, Carry Case